Why does my LG WM2277HB Washing machine show an imbalance error?
If your LG Washing machine displays an imbalance error, it could be due to several reasons. The load might be too small, the appliance might be tilted, the laundry might be gathered to one side, or non-distributable items might be in the drum. Try redistributing the load or adjusting the appliance to correct the imbalance.
What to do if my LG WM2277HB Washing machine shows a door open error?
If your LG Washing machine is showing a door open error, ensure that the door is fully closed. Also, check for loose electrical connections at the door switch and PWB assembly. The door switch assembly might also be out of order, so check connections.
How to troubleshoot a locked motor error on an LG WM2277HB Washing machine?
If your LG Washing machine displays a locked motor error, check the connections to ensure the harness is intact. Specifically, verify that: 1. The connector (3-pin, male, white) in the MOTOR HARNESS is connected to the connector (3-pin, female, white) of STATOR ASSEMBLY. 2. The electric contact between the connectors (3-pin, male, white) in the MOTOR HARNESS and 4-pin, female, white connector in the MAIN PWB ASSEMBLY is good or stable. 3. The MOTOR HARNESS between the STATOR ASSEMBLY and MAIN PWB ASSEMBLY is not cut (open circuited). 4. The hall sensor is not out of order/defective.
What does an over current error mean on my LG Washing machine?
If your LG Washing machine shows an over current error, it means that either the MAIN PWB ASSEMBLY is out of order or the winding in the STATOR ASSEMBLY is short-circuited. Check both the MAIN PWB ASSEMBLY and STATOR ASSEMBLY.
General| Brand | LG |
|---|---|
| Model | WM2277HB |
| Category | Washing machine |
| Language | English |
To Next Page
