EasyManua.ls Logo

LG WM2496H series - Advanced Options and Indicators

LG WM2496H series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HOW TO USE THE WASHER
OPTION
CHILD LOCK
DOOR LOCKED
16
• Use this option for loads that need pretreatment. Adds
16 minutes prewash and a spin cycle.
1. Prewash
• Displays whenever the door of the washer is locked.
• The door can be unlocked by pressing the
Start/Pause button to stop the washer.
NOTE: If the water temperature or the level is too high, the
door cannot be unlocked.
Do not try to force the door open when
is displayed.
STATUS INDICATOR
• It shows elapsed time of the cycle the washer is
operating.
EST. TIME REMAINING
• This display shows the estimated time remaining
in the cycle when operating.
• This washer automatically detects the wash load
(weight) and optimizes the washing time. After
detecting, the display will show the adjusted time
remaining.
• Use this option to prevent unwanted use of the washer.
Press and hold PRE WASH button for 3 seconds to
lock/unlock control.
• When Child lock is set, “ ” blinks and all buttons are
disabled except the Power button. You can lock the
washer while it is operating.
• Adds extra water to the wash and rinse cycles for
superior results.
5. Water Plus
• This option provides an additional rinse.
• Use this option to ensure the removal of detergent or
bleach residue from garments.
3. Extra Rinse
• Use this option to rinse and then spin.
2. Rinse+Spin
• Adds more time to the wash and rinse cycles for better
stain removal.
• Automatically provides a rinse.
4. Stain cycle
• Spin Sense
TM
‚ can be used when there is a vibration
problem, especially on wood floor installations.
• To operate Spin Sense
TM
‚, press and hold the Stain
Cycle button for 3 seconds when the washing machine
is running on any cycle.
• When Spin Sense
TM
‚ has been selected, the Spin
Speed button light will blink on and off continually to
indicate that the Spin Sense
TM
‚ function has been
selected.
• Push and hold the Stain Cycle button again for 3
seconds to cancel Spin Sense
TM
.
• Once Spin Sense
TM
‚ has been selected, if will continue
to function even if interrupted by a power failure.
6. Spin Sense
TM

Other manuals for LG WM2496H series

Related product manuals