To Next PageTo Next PageWhy is my LG WM2650HRA Washer not draining properly?
If your LG washer is draining slowly or not at all, try these solutions: Lower the drain hose to be within 3 feet below the end of the elbow bracket. Ensure the drain hose rests on a smooth surface to prevent bending. If the drain hoses are frozen, thaw them with warm water. Also, open the drain pump plug cap and remove any dirt.
What to do if water is leaking around my LG WM2650HRA Washer?
If you notice water leaking around your LG washer, check the faucets and water lines for any issues. You can also unclog the drain pipe or drain hose. If needed, contact a plumber for assistance.
What to do if my LG Washer has excessive suds?
If your LG washer has excessive suds or isn't rinsing well, use the recommended amount of detergent for the load. If the contamination level is low, reduce the detergent quantity. Ensure you are only using detergent with the HE (High-Efficiency) logo.
How to clean the tub of my LG WM2650HRA?
To clean the tub of your LG washer, empty it and insert bleach into the detergent dispenser. Then, select the TUB CLEAN cycle. If you prefer to skip the TUB CLEAN cycle, turn the CYCLE SELECTOR KNOB or use the option buttons to select the cycle you want.
What to do if water is not supplied to my LG WM2650HRA?
If water is not being supplied to your LG washer or the water pressure is low, make sure the faucets are turned on. If a faucet is frozen, thaw it with warm water. If the inlet filter is clogged, clean it. Connect the water line properly with the cold water inlet. Check that the water lines are not pinched or bent.
Why is my LG Washer not rotating?
If the tub in your LG washer isn't rotating, rearrange the load and restart the washing machine. If the load is too large, the motor may be overheated, so allow the machine to stand for a while before restarting. Make sure that the door is closed and secured.
What to do if my LG WM2650HRA experiences a power failure?
If a power failure occurs with your LG washer, press the power button to turn the washing machine off, and then press it again to turn it back on.
What to do if the water line leaks in connection of my LG WM2650HRA?
If the water line leaks at the connection of your LG washer, connect the water lines properly with the faucets.
Why is my LG Washer making a thumping sound?
If your LG washer is making a thumping sound, stop the cycle and rearrange the load to ensure it's balanced.
Why is my LG WM2650HRA making rattling and clanking noise?
If your LG washer is making rattling and clanking noises, check the tub for any foreign objects and clean the drain filter after you stop the cycle.
General| Door hinge | Left |
|---|---|
| Display type | LED |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | Red |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Dispenser tray type | 4-way |
| Drum capacity | 10.1 kg |
| Delay start (max) | 19 h |
| Spin-drying class | - |
| Maximum spin speed | 1200 RPM |
| Noise level (wash) | - dB |
| Load balancing system | No |
| Number of washing programs | 9 |
| Energy consumption washing per cycle | - kWh |
| Package depth | 787 mm |
| Package height | 1066 mm |
| Package weight | 87490 g |
Weight and Dimensions| Depth | 736 mm |
|---|---|
| Width | 685 mm |
| Height | 965 mm |
| Weight | 82460 g |
Defines DANGER, WARNING, and CAUTION symbols and their meanings.
Provides essential safety rules for operating the washing machine.
Explains the importance and method of proper grounding for electrical safety.
Covers safety measures during the installation process of the washer.
Outlines safety rules for operating, maintaining, cleaning, and disposing of the washer.
Provides a preview of installation steps and initial setup procedures.
Guides on choosing a proper location and requirements for floor or pedestal installation.
Explains how to safely unpack and remove shipping bolts from the machine.
Details the process for connecting hot and cold water supply lines.
Instructs on properly connecting the drain hose for water removal.
Covers how to level the machine for optimal performance and stability.
Guides on plugging in, grounding, and performing a test run for the washer.
Lists error codes displayed on the machine and their potential causes and solutions.
