To Next Page

To Previous Page

INSTALLATION INSTRUCTIONS

ENGLISH

Unpacking and removing shipping bolts

When removing the washer from the carton base, be sure to

remove the foam drum support in the middle of the carton

base.

If you must lay the washer down to remove the base

packaging materials, always lay it carefully on its side.

Do NOT lay the washer on its front or back.

Remove the bottom two shipping bolts with the wrench

(included) to fully loosen all four shipping bolts by turning

them counterclockwise and then pulling them out.

Shipping

bolt

Retainer

Locate the four hole caps included in the accessory pack

and install them in the shipping bolt holes.

Cap

NOTE

Save the bolt assemblies for future use. To prevent

damage to internal components, DO NOT transport the

washer without reinstalling the shipping bolts.

Failure to remove shipping bolts and retainers may

cause severe vibration and noise, which can lead to

permanent damage to the washer. The cord is secured

to the back of the washer with a shipping bolt to help

prevent operation with shipping bolts in place.

Other manuals for LG WM3470HVA

Questions and Answers:

Need help?

Do you have a question about the LG WM3470HVA and is the answer not in the manual?

General

Door color	Chrome
Door hinge	Left
Motor type	Beltless
Control type	Buttons
Display type	LED
Loading type	Front-load
Product color	Silver
Built-in display	Yes
Appliance placement	Freestanding
Drum capacity	10.1 kg
Spin-drying class	-
Maximum spin speed	1200 RPM
Noise level (wash)	- dB
Number of washing programs	12
AC input voltage	120 V
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Sustainability certificates	ENERGY STAR
Package depth	787.7 mm
Package width	737.1 mm
Package height	1092.5 mm
Package weight	101604.7 g