EasyManua.ls Logo

LG WT1410NHB - User Manual

LG WT1410NHB
72 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER'S MANUAL
WASHTOWER
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that the
product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
ENGLISH
WT1410NHB / WT1410NHEG
MFL72097591
Rev.00_040224
www.lg.com
Copyright © 2024 LG Electronics Inc. All Rights Reserved.
Scan the QR code to see the manual.

Table of Contents

Questions and Answers

  • T
    Teresa LambertSep 12, 2025
    Why does my LG WT1410NHB Laundry Appliance show a UE unbalance error?
    • A
      Allison HowellSep 12, 2025
      The UE error on your LG Laundry Appliance indicates an imbalance. This could be due to several reasons. The clothes may be too wet at the end of the cycle, so rearrange the load to allow proper spinning. Close the door and press the Start/Pause button. Alternatively, the load might be too small; adding 1 or 2 similar items or smaller articles of clothes can help balance it. Close the door and press the Start/Pause button. A kinked or clogged drain hose can also cause this; clean and straighten the drain hose.
  • H
    Holly WatkinsAug 26, 2025
    Why is my LG Laundry Appliance making a vibrating noise?
    • N
      nathaniel14Aug 26, 2025
      A vibrating noise in your LG Laundry Appliance can be caused by: * Unremoved package materials: Remove all packaging materials. * Unevenly distributed clothes in the drum: Pause the program and redistribute the clothes after the door unlocks. * Levelling feet not resting firmly and evenly on the floor: See the Levelling the Appliance instruction to adjust the levelling of the appliance. * Floor not rigid enough: Check if the floor is solid and does not flex.
  • N
    Nathaniel TrujilloAug 26, 2025
    Why does my LG Laundry Appliance make a thumping sound?
    • K
      Kimberly CarlsonAug 26, 2025
      If your LG Laundry Appliance is making a thumping sound, it's likely that the clothes are out of balance. Pause the program and redistribute the clothes after the door unlocks.
  • T
    Tiffany DavidsonNov 22, 2025
    What to do if my LG Laundry Appliance is leaking water?
    • M
      Matthew BrownNov 23, 2025
      If your LG Laundry Appliance is leaking water, there might be several reasons: * The house drain pipes could be clogged: Unclog waste pipes and contact a plumber if needed. * The drain hose may be improperly installed or clogged: Clean and straighten the drain hose, and check/clean the drain filter regularly. * The drain pump filter cap may not be fitted correctly: Refit the drain pump filter. * The control panel may have powered off due to inactivity: This is normal; press the Power button to turn the appliance on. * The appliance may be unplugged: Ensure the cord is securely plugged into a working outlet. * The water supply may be turned off: Turn the water supply tap completely. * The controls may not be set properly: Ensure the program is correctly set. Close the door an...
  • M
    Megan JohnsonSep 13, 2025
    What to do if my LG Laundry Appliance does not operate?
    • R
      Rachel RaySep 13, 2025
      If your LG Laundry Appliance isn't operating, several factors could be at play. First, check your house's circuit breakers or fuses and replace any blown fuses or reset the breaker. The control might need resetting; press the Power button, reselect the desired programme, and press Start/Pause. Ensure you've pressed Start/Pause after setting a programme. Lastly, extremely low water pressure can prevent operation; check another tap in the house to ensure adequate household water pressure.
  • S
    stephaniesmithSep 18, 2025
    What does PF POWER FAILURE mean on my LG WT1410NHB?
    • S
      Shelby HuntSep 18, 2025
      The PF POWER FAILURE error on your LG Laundry Appliance indicates that a power failure or inadequate electrical service may have occurred during operation. Press the Start/Pause button to restart the cycle.
  • K
    Kimberly KentSep 6, 2025
    What does PE PRESSURE SENSOR ERROR mean on LG WT1410NHB Laundry Appliance?
    • E
      Eric HollowaySep 6, 2025
      The PE PRESSURE SENSOR ERROR on your LG Laundry Appliance indicates that the water level sensor is malfunctioning. Close the water tap, unplug the power plug, and call for service.
  • S
    suarezpaigeSep 7, 2025
    What does vs VIBRATION SENSOR ERROR mean on LG WT1410NHB?
    • M
      michaelortegaSep 7, 2025
      The vs VIBRATION SENSOR ERROR on your LG Laundry Appliance indicates that the vibration sensor is malfunctioning. Call for service.
  • J
    Jason BeasleySep 19, 2025
    Why is the cycle end delayed on my LG Laundry Appliance?
    • J
      Joshua Mathews PhDSep 22, 2025
      A delayed cycle end on your LG Laundry Appliance is normal if unbalance is detected or a suds removing programme is on. The time remaining shown on the display is only an estimated duration.
  • T
    teresajenningsAug 31, 2025
    How to fix 1E INLET ERROR on LG Laundry Appliance?
    • K
      Kristin WeaverAug 31, 2025
      To address a 1E INLET ERROR on your LG Laundry Appliance, consider the following: * Inadequate water supply: Check another tap in the house to ensure sufficient water supply. * Water supply tap not fully open: Open the tap completely. * Kinked water supply hose(s): Straighten the hose or reinstall the water inlet hose. * Clogged supply hose filter(s): After turning off the taps and disconnecting the hose connections to the washing machine, check and clean the inlet valve filter.

LG WT1410NHB Specifications

General IconGeneral
TypeTop Load Washer
Capacity5.0 cu. ft.
Energy Star CertifiedYes
Weight134.5 lbs
ColorBlack Stainless Steel
SteamYes
SmartDiagnosisYes
TurboWashYes
Water Level SettingsAuto
Dimensions (H x W x D)Height: 1020 mm x Width: 600 mm x Depth: 620 mm

Related product manuals