To Next PageTo Next Page
Need help?Do you have a question about the LGMG S1932E II and is the answer not in the manual?
General| Brand | LGMG |
|---|---|
| Model | S1932E II |
| Category | Scissor Lifts |
| Language | English |
Describes the machine as a mobile elevating work platform.
Instructions on cleaning and replacing safety signs and decals.
Safety precautions related to electrical hazards and safe approach distances.
Safety guidelines for handling batteries, including hazards and precautions.
Procedures for securing the machine after operation to prevent unauthorized use.
Details the controls located on the ground station of the machine.
Describes the controls available on the platform for operation.
Outlines the operator's responsibilities for pre-operation checks.
Detailed checklist and procedures for daily pre-operation inspection.
Explains the purpose of workstation inspection for safe operation.
Identifies potential hazards to be aware of at the work site.
Explains the purpose of function tests and operator responsibilities.
General instructions for performing function tests on a firm, level surface.
Steps to perform tests using the ground controls.
Procedure to test the functionality of the emergency stop switches.
Steps to verify the platform's lift and lower functions.
Procedure to test the emergency lowering mechanism.
Test procedure for the platform controller, including emergency stop.
Steps to test the audible horn function.
Test for lift function and the enabling switch operation.
Procedure to test the steering functionality of the machine.
Test for driving and braking system operation.
Test for drive function and speed limitations when elevated.
Test to verify the tilt sensor and alarm functionality.
Procedure to test the pothole guard deployment and alarms.
General overview of the machine's purpose and operator responsibilities.
Instructions on how to use the emergency stop function.
Procedure for manually lowering the platform in an emergency.
Steps for operating the machine using the ground controls.
Instructions on positioning the platform from the ground controls.
Steps for operating the machine using the platform controls.
Instructions on positioning the platform using the platform controls.
How to steer the machine using the platform controls.
How to drive the machine using platform controls, including speed.
Explanation of selecting between slow and high drive speeds.
Guidance on driving the machine from the ground controller.
Precautions and procedures for driving the machine on slopes.
Instructions on how to properly use the safety prop.
Step-by-step guide to folding and stowing the platform guardrails.
Instructions for raising and erecting the platform guardrails.
How to extend and retract the platform's extension deck.
Information on operating the DC power switch and Anderson connector.
List of error codes, their descriptions, and recommended responses.
Procedures for releasing the machine's brake for transport or movement.
Safety guidelines for securing the machine during transport.
Instructions for safely loading the machine using a forklift.
Safety measures and procedures for lifting the machine with a crane.
Guidelines for properly parking and storing the machine.
Details recommended hydraulic oil types based on ambient temperature.
