EasyManua.ls Logo

LGMG S2632E II User Manual

Default Icon
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LGMG North America Inc.
Operation and Safety Manual
S1932E/S2632E/S2646E/S3246E
S4046E/S4650E/S1932/S2632
S2646/S3246/S4046/S4650
Scissors Mobile Elevating Work Platform
ANSI
WARNING
Before operation and maintenance, the
drivers and service personnel shall
always read and thoroughly understand
all information in this manual. Failure to
do so may result in, fatal accidents or
personal injury.
This manual must be kept with this
machine at all times.

Table of Contents

Other manuals for LGMG S2632E II

Question and Answer IconNeed help?

Do you have a question about the LGMG S2632E II and is the answer not in the manual?

LGMG S2632E II Specifications

General IconGeneral
Platform Capacity230 kg
Platform Width0.81 m
Overall Width0.81 m
Drive TypeElectric
Gradeability25%
Extension Deck0.9 m
Turning Radius (Inside)0 m
Drive Speed (Raised)0.8 km/h
TyresNon-marking
Power Source24 V

Summary

Chapter 1 Safety

General Operational Safety and Tip-Over Hazards

Details tip-over hazards, load limits, and general operational safety.

Prohibited Operations and Slope Hazards

Lists forbidden actions, slope safety, and crushing hazards.

Explosion, Fire, and Personal Injury Hazards

Addresses explosion, fire, and personal injury hazards.

Battery Safety and Post-Use Security

Covers battery safety and securing the machine after use.

Chapter 4 Pre-Operation Inspection

Inspection Principles and Responsibilities

Outlines the operator's responsibilities for pre-operation and maintenance.

Pre-Operation Inspection Steps

Details the procedures for conducting a thorough pre-operation inspection.

Chapter 6 Function Test

Test Overview and Ground Control Tests

Purpose of function tests and tests from ground controls.

Platform Control System Tests

Tests for emergency stop, lift/lower, horn, and platform controller.

Driving, Steering, and Sensor Tests

Tests for lift function, steering, driving, braking, and tilt sensor.

Pothole Guard Test

Procedure to test the pothole guard functionality.

Chapter 7 Operating Instructions

General Operation and Emergency Procedures

Basic operation, emergency stop, and lowering instructions.

Chapter 8 Transport and Lifting Instructions

Chapter 11 Maintenance Schedule

Related product manuals