39
(where possible) or calculated by algorithm of
regulation in winter.
• CH TEMPERATURE
Current temperature measured by the delivery
probe.
• CH RETURN TEMPERATURE
Current temperature measured by the return
probe.
• MODULATION POWER
Percentage level of modulation power (ame
level).
• CH WATER PRESSURE
Level of water pressure in the system (prime
circuit).
• BOILER EXHAUST TEMPERATURE
Current temperature measured by ue probe.
• POWER AV. 24 HOURS
Average equivalent power delivered in the last
24 hours, mediated in the hour (picture10). It is
a purely indicative data, it can not be used for
tax purpose or for real power measuring. The
measure unit is kWe (equivalent to kW) and
it is referred to a standard boiler (potentially
parameterized using HEATING SETTINGS
Menu in the item PARAM. GRAPHICS
POWER).
Note: The loss of power supply > 24h, as
well as the factory data reset, will cause the
resetting of recorded data.
• POWER AV. 30 DAYS
Average equivalent power delivered in the last
30 days. See what is explained in Power Av.
24 Hours.
• POWER AV. 12 MONTHS
Average equivalent power delivered in the last
12 months. See what is explained in Power Av.
24 Hours.
6.1.3 GENERAL
• FIRMWARE VERSION
Firmware Version loaded in the device.
6.2 HOT WATER SETTINGS
It is possible to set up some Hot Water parameters: Set (it
can be modied also from Hot Water Home through knob
picture 10
To Next Page
Loading...