19
Safety warnings for the user
The environmental conditions of the mixer installation place must have the following characteristics:
• It has to be dry;
• The water and heat sources have to be positioned at a suitable distance;
• Ventilation and adequate lighting system compliant to the rules of hygiene and safety foreseen by the laws in force;
• The floor must be flat and compact to ease thorough cleaning;
• No obstacles of any kind that could affect the normal ventilation of the mixer must be located near it.
In addition, the user must:
• Prevent the access of children close to the mixer when it is running;
• Observe the prescriptions contained in this manual;
• Not remove or tamper with the safety devices of the mixer;
• Always use caution, meaning monitoring the process and do not use the mixer when distracted;
• Follow the instructions and warnings highlighted by the plates applied on the mixer.
The plates are accident-preventing devices, therefore they must always be perfectly legible. If damaged and unreadable,
it is mandatory to replace them, requesting the original spare to the manufacturer.
• Disconnect the mixer from the power supply after each use and prior to any cleaning and maintenance operation.
Safety warnings for the maintenance operator
Follow the prescriptions referred to in this manual:
• Always use the personal protection equipment and the other means of protection.
• In case even one of the safety devices is incorrectly adjusted or not working, the mixer is to be considered faulty.
• Remove the power supply prior to working on electrical, electronic parts and on connectors.
To Next Page
Loading...
