Lidix CL-2 - Page 15

CL-2 Service Manual
2-3. Basic Operation
15
STEP 1. Plug the power cord into the power receptacle.
STEP 2. Turn on CL-2 by pressing Power Switch.
STEP 3. Select the Currency
STEP 4. Select a Counting Mode.
STEP 5. Adjust Hopper guide to the notes to be counted.
STEP 6. Put the notes onto the Hopper, and counting starts automatically.
• Remarks
- Setting options will begin from next page. Please
- After changing the User Setting, press the icon to save the new setting, otherwise the setting
will remain unchanged