Lidix CL-2 - Page 98

CL-2 Service Manual
8. Daily cleaning
1. Turn off the machine before starting the cleaning.
2. Remove any foreign material or the dust inside of the machine and clean the sensors, which is described as below.
98
NO NAME
① Hopper Sensor
② Upper Counter Sensor
③ Lower Counter Sensor
④ MG sensor
⑤ Upper CIS Sensor (CIS2)
⑥ Lower CIS Sensor (CIS1)
⑦ UL RE Sensor
⑧ UL TR Sensor
⑨ Stacker Sensor