Need help?Do you have a question about the Liebert MPH-NBV27NXXH30 and is the answer not in the manual?
General| Model | MPH-NBV27NXXH30 |
|---|---|
| Product Type | Power Distribution Unit |
| Input Voltage | 200-240 VAC |
| Input Frequency | 50/60 Hz |
| Output Voltage | 200-240 VAC |
| Amperage | 30A |
| Number of Outlets | 27 |
| Mounting | Vertical |
| Network Management | Yes |
| Phase | Single Phase |
| Communication Ports | RJ45, USB |
| Operating Temperature | 0 to 45°C |
| Operating Humidity | 5 to 95% non-condensing |
Details general characteristics of Liebert MPH units, including input/output systems.
Lists factory-supplied and field-supplied hardware and tools for installation.
Step-by-step instructions for installing the Liebert MPH in a Knurr rack.
Instructions on how to reposition the unit's input power cord 90 degrees.
Lists hardware and tools needed for horizontal rack mounting installation.
Instructions for mounting the Liebert MPH horizontally in a Knurr rack.
Description of the RPC BDM for local display of system status.
Steps to mount the RPC BDM display module in the rack.
Guide for installing optional temperature/humidity sensors in the rack.
Lists agency approvals for 120/208V and 230/400V Liebert MPH units.
Instructions for registering the product for warranty protection.
To Next Page