- 14 -
TROUBLESHOOTING:
TECHNICAL SPECIFICATION:
Vacuum is not cleaning well
Vacuum suddenly stops
Battery will not charge
Floor brush doesn’t spin
Battery
Charging
Battery charger output
Usage time
Power
Vacuum
22.2v/2200mAh
4 hours
26.5V / 500mA
30min (low speed), 15min(high speed)
250W
22kPa
1.Empty the dust bin
2.Check that the dust bin is correctly attached
3.Check that the filter is correctly attached
4.Clean the filter
1.Make sure the dust cup is in the locked position
2.Check the electrical inputs in the dirt chamber get stuck or not
1.Charge the battery
2.Clear debris from the brush bar
1.Check connections
2.Clear wall socket
To Next Page
Loading...
