and
warm
water
(or
non-flammable
or
high flash
-
point
cleaning solvents) and dry up,
then soak
in
clean
engine
oil until saturated.
Squeeze
out
excess
oil, otherwise,
the
engine will discharge
smoke
in
starting stage.
b)
Paper filter
element: knock the core against a
solid
plane
to
get
rid of accumulated
dust
or blow out
dust
from
inside to outside with high
-
pressure
air
flow
(not
more
than 30psi). Never clean
with
a brush, as brushing
may force
the dust into the core
fiber.
If
the
core
is extremely
filthy,
replace it with a new one.
*
Semi-dry type
(Pic.25)
a)
Unscrew the wing
nut, remove
the
air
cleaner
housing, Pic.25
then take out the
filter
element.
b) Clean the filter element with non-flammable or high
flash-point
cleansing solvents, and dry
it up.
c) Soak the core in clean engine oil until saturated. Squeeze excess oil, otherwise the engine
will
discharge
smoke
in
starting stage.
d)
Install the
parts
to
original
position.
Air cleaner
Filter
lV ing nut
housing
elenr
ent
25
To Next Page
Loading...