TRANSPORT,
STORAGE AND REMOVAL
FROM
STORAGE
a.
I.TRANSPORT
Transport
with
the
fuel switch turned
off. Transport
or store the
engine it is
cool so as to avoid
getting
burns or fire.
If the
engine is
not kept in
use for a long
time,
be sure
to store
it
properly.
l) Make
sure
the
storage
area
is dry
and free of
dust.
2) Make sure to put
the oil
(which
in
the
gasoline
tank
and carburetor) into another
proper
container.
CURTION
Fuel is extremely
flammable and
explosive
under
ceftain conditions. Keep cigarette,
open flames and sparks away
from operating site.
1) Replace the engine
oil.
2) Disconnect
the spark
plug.
Fill
a spoon of fresh engine oil from
the spark
plug
mount hole into
the cylinder.
Rotate
the engine to distribute
engine oil evenly,
followed
by
fitting
the spark
plug
to original
position.
3) Pull the
starting
rope
slowly
until
feel a
slight anti-action,
and then keep
pulling
so as to align the arow
of the
starting sleeve
with the hole of the starter. At
this time,
both the inlet and
outlet valves are clàsed so to help
prevent
the engine inside
from rusting.
l
4) Electric
starter: disconnect the
battery and store in
dry and cool area.
Charge once every month.
5)
Cover the engine
so
keep
dust away.
32
To Next Page
Loading...