Life Fitness FTR User Manual (English)

Questions and Answers:

E
Elizabeth BrownAug 12, 2025
What to do if Life Fitness Treadmill console does not turn on?
- R
  Richard HicksAug 13, 2025
  First, check if the treadmill is in 'Energy Saver Mode' by pressing the 'Energy Saver' button. If that doesn't work, ensure the treadmill is plugged in and the ON/OFF switch is on. If the switch is unlit, verify the power cord isn't damaged and the wall outlet is functional, checking for tripped breakers. If the ON/OFF switch is lit, check all customer assembly connections, unplugging and re-plugging each to ensure proper connection and inspect for pinched cables.
J
Jeanette VillarrealAug 16, 2025
What to do if Life Fitness FTR Treadmill belt seems to slip when I run on it?
- B
  Benjamin BellAug 16, 2025
  You may need to tighten the walking belt. Please refer to the instructions on How to Adjust and Tension the Striding Belt.
A
Alisha WarnerAug 19, 2025
Why is my Life Fitness FTR belt tracking to the left or right?
- C
  Charles HernandezAug 20, 2025
  Please refer to the instructions on How to Adjust and Tension the Striding Belt to resolve this issue.
J
Joan YoungAug 23, 2025
What to do if Life Fitness Treadmill will not unfold?
- T
  Tina MartinAug 23, 2025
  Ensure you pull the release lever on the top left side of the deck. You might need to push up on the folded part of the treadmill while pulling the lever to help release the locking pin.
J
James SteeleAug 27, 2025
What to do if Life Fitness FTR Treadmill will not lock when I fold it up?
- T
  tcarsonAug 27, 2025
  Ensure that the treadmill is at 0% incline before folding it up. It will not lock if the incline is not at 0%.
T
tmanningAug 31, 2025
Why does my Life Fitness FTR Treadmill shake a lot when I run on it?
- R
  Richard ChaseAug 31, 2025
  First, turn the treadmill off and ensure all assembly hardware is tightened securely. If the shaking persists, adjust the levelers located under the stationary frame until the shaking diminishes.
L
Lisa BauerSep 4, 2025
Why are the contact heart rate sensors on my Life Fitness Treadmill not reading correctly?
- G
  Gerald WilliamsSep 4, 2025
  Grasp the sensors firmly and keep your hands still. If the heart rate seems much higher or lower than expected, remove your hands from the sensors until the heart rate disappears. It is recommended to stand on the side rails when monitoring heart rate with contact sensors. For best results: 1. Dry your hands to prevent slipping. 2. Apply both hands to all four sensors (two in each hand). 3. Grasp the sensors firmly. 4. Apply constant pressure.
C
Cassandra GordonSep 8, 2025
How to fix problems bolting parts together on Life Fitness Treadmill?
- S
  Sarah GalvanSep 8, 2025
  To resolve bolting issues during assembly: 1. Do not fully tighten any screws until the uprights, console, and handrails are all installed. 2. Inspect the screw threads for any signs of damage. 3. After all components are installed, proceed to tighten all hardware securely.