9
+
+
+
+
+
+
5”
2
+
+
+
+
+
+
80%
85%
95%
2
1
1
5 SPEED AND SENSIBILITY
5.1 ADJUSTING SPEED
Wait 20” or press the button again to anticipate the exit from the programming mode.
SENSITIVITY
MINIMUM
5.2 MOTOR SENSITIVITY ADJUSTMENT
a) Press the button for 5” the green and red
Led on the left will turn on.
MAXIMIUM
DEFAULT
LED ON SPEED
MINIMUM 75%
a) Press the button and left red led will turn on:
By pressing or the speed can be adjusted.
MAXIMUM 100%
DEFAULT 90%
LED ON
ATTENTION:
Based on the gate’s structure and on its usage parameters such as sensitivity and speed mus be setted
accordingly to the laws of the country.
+
By pressing or the sensitivity can be
adjusted .
+
Wait 20” or press the button again to anticipate the exit from the programming mode.
To Next Page
Loading...
Need help?
General
