Life Ionizers MXL-11 - Page 47

47
LIFE MXL-11 C/UCLifeIonizers.com/support
Q: How does a water ionizer work?
A: Your counter top Alkaline LIFE Ionizer® LIFE MXL-11 can be
directly connected to a diverter valve at the end of your faucet.
Connecng directly to your faucet takes about 10-15 minutes.
Once connected your water ionizer uses a two step process to
transform your tap water into refreshing, healthy alkaline water.
Your ionizer’s rst task is to help lter out harmful components
of the water with our built-in dual lter system. The LIFE Ionizer®
achieves this by using mul-stage lters. In the second stage,
the ltered water passes into the electrodialysis chamber,
which is equipped with planum-coated tanium plates. An
electrical charge is introduced into this water. This is where the
electrodialysis takes place.
The water is separated into two streams (acid and Alkaline) of
Ionized water. The acid water (oxidized) makes up about 30%
of the water and the Ionized Alkaline Water 70%. The Ionized
Alkaline Water comes out of the faucet, and you use it for
drinking or cooking.
The acid (oxidized) water comes out of a separate hose leading
into the sink. The oxidaon potenal of the acid water makes it
a good sanizing agent, ideal for washing your hands, cleaning
food or kitchen utensils, and treang minor wounds and
eczema. Ionized acidic water is a miracle hair rinse!
The Chemistry of Ionized Water
A water ionizer splits the mineral carbonates found in tap water
into alkaline and acidic parts. The minerals, mostly calcium and
magnesium are alkaline, the carbonate, which is CO2 dissolved
in water, is acidic.