Life Ionizers MXL-11 - Page 50

50
LIFE MXL-11 C/UC LifeIonizers.com/support
Q: What is hard water?
A: According to the U.S. Geological Survey, more than 85
percent of the United States geography has hard water. Hard
water forms when naturally occurring minerals enter water
sources. Over me these minerals are absorbed by groundwater.
The two most common types of minerals found in hard water
are calcium and magnesium compounds. The Water Quality
Associaon of the United States denes hard water as water
containing dissolved hardness minerals above 1 GPG (grains
per gallon). The most common hardness causing minerals are
Calcium and Magnesium. Levels of hardness are classied as
follows:
So Water - less than 1 GPG,
Slightly hard - 1 to 3.5 GPG
Moderately hard - 3.5 to 7 GPG
Hard - 7 to 10.5 GPG
Very Hard - 10.5 and higher GPG
Q: Why do I want to adjust the amperage on my
Water Ionizer?
A: As you know, all water sources are not created equal.
Your water source plays an important role on how your water
Ionizer creates Ionized Alkaline Water. Being able to adjust
the amperage will allow you to nd the opmum pH for the
best producon of Alkaline Ionized water based on your water
source.