1. Remote control signal sensor
2. Digital display: Indicatesset desired room temperature
3. Power indicatorlight: Indicates that the heater is receiving power from outlet. Will flash when
powered “ON’
4. ON/OFF button: Powers the display on and off
5. Energy-saving mode (ECO) indicator: Will be lit whenECO mode is engaged
6. Mode button: To select between High, Low, and Eco modes
7. Low Mode indicator light: Will be lit whenLow Heat mode is engaged
8. TemperatureUp button: To increase desired temperature
9. High Mode indicator light: Will be lit whenHigh Heat mode is engaged
10. Temperature Down button: To decrease desired temperature
11. Timer indicatorlight: Will be lit whenthe Timer is engaged and active
12. Timer button: Used to engage timer mode and toset hour value for the timer
13. Fahrenheitindicator light: Will be lit when temperature displayed is in Fahrenheit
14. ℃/℉ Button:Alternates between Fahrenheit and Celsius
15. Celsius indicator light: Will be lit when temperature displayed is in Celsius
To Next Page
Loading...