Need help?Do you have a question about the LifeProof Nuud series and is the answer not in the manual?
Ensure O-ring and seal on the case back are in place and clean.
Ensure the integrated gasket on the case front is clean and free of debris.
Align the scratch protector with the touchscreen for proper application.
Hold bottom half, pull tab (A), and peel away the rear protective film.
Ensure no air bubbles are present under the screen film during application.
Pull tab (B) and peel away the top protective film.
Open the charge port door and use the case key or coin to separate the case.
Pull the case apart and carefully remove the device.
Keep O-rings, covers, seals, and gaskets clean at all times.
Conduct water tests before water use and repeat every three months.
Rinse the case with fresh water after exposure to soap, chlorine, or seawater.
Regularly back up your device's data to prevent data loss.
Inspect the case for damage and ensure seals after major impacts.
General| Brand | LifeProof |
|---|---|
| Model | Nuud series |
| Category | Cell Phone Accessories |
| Language | English |
To Next Page
