EasyManua.ls Logo

LifeSafety Power FlexPower Vantage FPV6-R8E1

Default Icon
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
P03-054
FPV4-R8E1
4 amp @ 12VDC or 3A/24VDC
Eight (8) Fused outputs
FPV6-R8E1
6 amp @ 12VDC or 24VDC
Eight (8) Fused outputs
FPV102-R8E1
10 amp @ 12VDC
Eight (8) Fused outputs
FPV104-R8E1
10 amp @ 24VDC
Eight (8) Fused outputs
FPV4-R8PE1
4 amp @ 12VDC or 3A/24VDC
Eight (8) Class II Power Limited outputs
FPV6-R8PE1
6 amp @ 12VDC or 24VDC
Eight (8) Class II Power Limited outputs
FPV102-R8PE1
10 amp @ 12VDC
Eight (8) Class II Power Limited outputs
FPV104-R8PE1
10 amp @ 24VDC
Eight (8) Class II Power Limited outputs
For 230VAC input add "/E" to model number - example FPV6-R8E1/E
For larger enclosure change E1 sux to E2 in model number - example FPV6-R8E2
LifeSafety Power, Inc.
PH 888.577.2898
TechSupport@LifeSafetyPower.com
R8 Access Power
Installation Guide
Smart Power Supply Chargers
Question and Answer IconNeed help?

Do you have a question about the LifeSafety Power FlexPower Vantage FPV6-R8E1 and is the answer not in the manual?

LifeSafety Power FlexPower Vantage FPV6-R8E1 Specifications

General IconGeneral
BrandLifeSafety Power
ModelFlexPower Vantage FPV6-R8E1
CategoryPower Supply
LanguageEnglish

Summary

Enclosure Mounting

Mounting an Enclosure

Step-by-step guide for securely mounting the enclosure to a wall surface.

R8 Power Control Dry Contact Output

Diode Removal

Instructions for removing output diodes to configure dry contact outputs.

Vantage Power SupplyCharger FAI Input Usage

Activation with a Normally Open Relay Contact

Configuring FAI activation using a normally open relay contact.

Latching the FAI Input

Implementing latched FAI activation via a normally closed contact.

Activation with a Normally Closed Relay Contact

Configuring FAI activation using a normally closed relay contact.

Activation with a Voltage Input

Using a voltage input signal for FAI activation.

FAI Activation with a Normally Open Relay Contact and FPV AC Fault Lock Over Ride

Combining NO relay activation with AC fault override for FAI.

General Applications

UL1076, Proprietary Burglar Alarm Applications

Specific requirements for UL1076 burglar alarm system applications.

S319, Access Control Applications

Specific requirements for S319 access control system applications.

Related product manuals