Why is my lifeSMART LS-12PAC cooling efficiency not good?
If your lifeSMART Air Conditioner isn't cooling efficiently, try these steps: Clear any obstructions blocking airflow, move any nearby heat sources away from the unit, clean the air filter, and adjust the fan speed to a more suitable setting.
What to do if my lifeSMART LS-12PAC starts and stops frequently?
If your lifeSMART Air Conditioner starts and stops frequently, ensure you have a strong and reliable power source. Also, make sure the air exhaust is positioned horizontally. Remove any additional air exhausts that you've added to the unit.
How to fix a lifeSMART LS-12PAC Air Conditioner that does not operate at all?
If your lifeSMART Air Conditioner isn't operating, ensure it's properly plugged into the wall socket. Check the circuit breaker and reset it or switch it to the 'on' position if necessary. Also, discharge any condensed water from the base water outlet. Note that some noise is normal.
Why is my lifeSMART LS-12PAC Air Conditioner too noisy?
Some noise and vibration from your lifeSMART Air Conditioner is normal. However, ensure the unit is placed on a horizontal floor to minimize excessive noise or vibration.
General| Brand | lifeSMART |
|---|---|
| Model | LS-12PAC |
| Category | Air Conditioner |
| Language | English |
This manual is universal for portable air conditioners, advising users to read carefully for safety.
Identifies and labels the parts visible on the front of the portable air conditioner.
Identifies and labels the parts visible on the back of the portable air conditioner.
Explains the rotary knob functions (OFF, FAN, COOL) and indicator lights (POWER, FULL).
Emphasizes using a firm socket and warns against extension cords or surge protectors.
Details the digital display, TEMP, TIMER, FAN SPEED, and MODE buttons.
Describes the purpose and operation of each button on the remote control.
Explains how the unit's current operating mode is displayed on the remote.
Provides a step-by-step procedure to set the current time using the HOUR and MIN buttons.
Explains signal transmission and lists cautions for remote handling and placement.
Instructions for opening the case, replacing batteries, and closing the cover.
Instructions for draining water when the WATER FULL indicator is illuminated.
Details how to connect a hose for continuous water drainage in high humidity.
Step-by-step guide to remove, wash, rinse, and reinstall the air filter.
Advises cleaning the unit surface with a damp cloth and avoiding chemical solvents.
Checklists for air inlets/outlets, stoppers, and air filter placement before operation.
Steps for turning off, draining, drying, and covering the unit after the season.
Warnings against narrow rooms, direct sunlight, water exposure, and flammable liquids.
Warnings on socket use, unplugging, extension cords, and unit tilting.
Lists issues like no operation, poor cooling, noise, and frequent stops with solutions.
Recommends placing the unit in a flat location with 3ft clearance for airflow.
Illustrates how to take out and connect/disconnect the air exhaust hose.
Detailed steps for attaching and detaching the air exhaust adapter and hose.
Instructions for fitting the window kit for horizontal and vertical window types.
Guidance on hose length, bending points, and smoothness for maximum efficiency.
Explains how to swap the air outlet and exhaust air outlet positions.
Details the warranty period, what is covered, and common exclusions.
Lists circumstances that will invalidate the product warranty.
To Next Page
