LifeSource UA-767 Plus User Manual (English)

Questions and Answers:

C
Christina PerezJul 25, 2025
Why does my LifeSource Blood Pressure Monitor not measure correctly?
- I
  inicholsJul 26, 2025
  If the LifeSource Blood Pressure Monitor doesn't measure correctly, giving readings that seem too high or too low, there might be several reasons: * The cuff might not be fastened properly, so ensure it's correctly fastened. * Movement during measurement can affect readings, so remain still and quiet. * Incorrect cuff position can also cause issues, so sit comfortably and ensure the cuff is at heart level. * Using the wrong size cuff can lead to inaccurate readings. * Taking measurements too close together can affect readings, so relax for five minutes before each measurement.
B
Breanna AllenJul 31, 2025
Why is the cuff not inflating on my LifeSource Blood Pressure Monitor?
- S
  Shelly RodriguezJul 31, 2025
  If your LifeSource Blood Pressure Monitor cuff isn't inflating, it might be due to low battery voltage. The low battery symbol may be blinking. The solution is to replace all the batteries with new alkaline batteries.
K
Kimberly WongAug 6, 2025
How to fix a LifeSource UA-767 Plus Blood Pressure Monitor when nothing appears on the display?
- E
  espinozaduaneAug 6, 2025
  If nothing appears on the display of your LifeSource Blood Pressure Monitor after pressing the START button, it could be due to two reasons: * The batteries may be drained, in which case you should replace all batteries with new alkaline batteries. * The batteries may be incorrectly installed. Reinstall the batteries, ensuring the positive and negative terminals match the markings in the battery compartment.
H
hannahrichardsAug 13, 2025
Why LifeSource UA-767 Plus readings are too high or too low?
- J
  Joshua BennettAug 13, 2025
  If your LifeSource Blood Pressure Monitor gives readings that are too high or too low, it could be due to several reasons. Ensure the cuff is fastened correctly and positioned at heart level while you sit comfortably and still. Avoid moving your arm or body during the measurement. Also, relax for five minutes before taking a measurement. The wrong cuff size may also cause this issue.
M
Michael SuttonAug 18, 2025
What to do if the LifeSource Blood Pressure Monitor cuff does not inflate?
- N
  nicole00Aug 19, 2025
  If the cuff on your LifeSource Blood Pressure Monitor does not inflate, the battery voltage may be too low, and the low battery symbol might be blinking. Replace all batteries with new alkaline batteries.

LifeSource UA-767 Plus Specifications

General

Model	UA-767 Plus
Category	Blood Pressure Monitor
Measurement Method	Oscillometric
Measurement Range (Pressure)	0-299 mmHg
Accuracy (Pressure)	±3 mmHg
Memory Capacity	60 readings
Display	LCD
Power Source	4 AA batteries or AC adapter
Measurement Range (Pulse)	40-180 beats/minute
Cuff Size	22-32 cm
Accuracy (Pulse)	±5%
Weight	Approx. 240 g (without batteries)