LifeSpan Unity User Manual

18
Assembly Instructions
NOTE:
Recommend
using 2
people to
turn over
Desktop
Assembly
and to slide
Frames into
the Desk Base
Frame
Step 7: Attach Desk & Supports to Desk Base
A. Remove the two M8x15L Screws and Washers (19) from the ends of the
Left and Right Desk Attachment Frames (9)(10).
B. Position the Desktop over the Desk Base Frame(8) and slide the Left and
Right Desktop Attachment Frames(9)(10) into the Desk Base Frame.
C. Slide the frames all the way down and tighten the two M8 x 15 screws with
Washers(19), one on each side. Fully tighten all hardware.
D. Fully Tighten the the four M8x15L Screws and Washers(18) to fully secure
the Desktop to the Attachment Frames (9)(10) from Step 6C.
5mm Allen
Wrench w/
Phillips
9
19
10
8
PRE-INSTALLED
M8 x 15L Bolt
(x2)

LifeSpan Unity Specifications

General

Brand	LifeSpan
Model	Unity
Category	Indoor Furnishing
Language	English