LifeSpan Unity User Manual

17
Step 6:
Positioning Desktop
The Unity Bike Desk
allows you to position
the Desktop(11) in one of
three positions for your
preference; close, middle
and far.
The image to the right
shows an example of how
this can be achieved.
A. Turn the Desktop(11)
upside down on a soft
surface so as to not
scratch the surface of
the desk. Remove the
four M8x15L Screws
and Washers(18).
B. Position the Left and
Right Desk Attachment
Frames(9)(10) to
the bottom of the
Desktop(11) for how
close or far away you
prefer the Desktop to
be from you when in
use. Match the labels
'RRR' for the right
frame and 'LLL' for
the left frame to the
labels on the desk.
C. Re-install the four
M8 x 15L Screws
and Washers (18)
previously removed
from the Desktop.
Hand tighten only
at this time.
Assembly Instructions
Position Examples
Option 1:
Close
Position
PRE-INSTALLED
M8 x 15L Bolt
(x4)
Front
Back
10
11
18
9
Front
Back
Option 2:
Middle
Position
10
18
11
9
Option 3:
Far
Position
Front
Back
11
10
9
18
5mm Allen
Wrench w/
Phillips
Match Labels

LifeSpan Unity Specifications

General

Brand	LifeSpan
Model	Unity
Category	Indoor Furnishing
Language	English