Need help?Do you have a question about the LifeStraw Community and is the answer not in the manual?
General| Brand | LifeStraw |
|---|---|
| Model | Community |
| Category | Water Filtration Systems |
| Language | English |
Pour unfiltered water slowly and wait for it to flow into the storage container.
Do not use soap on filters, avoid sharp objects, always wash hands, and keep outlets clean.
Empty the LifeStraw Community and remove screws under the spacer ring.
Carefully remove spacer ring parts, then lift up the dirty water container.
Unscrew the two screws to disconnect the filter cartridge from the hoses.
Number each hose and note its position on the cartridge for correct reconnection.
Place new cartridge, fix screws, connect tubes to hoses, ensuring correct insertion and no twists.
Place dirty water container correctly, ensure air vent faces red lock, check hoses are attached and not twisted.
To Next Page