To Next PageTo Next Page
Need help?Do you have a question about the Lifestyle 60441U and is the answer not in the manual?
General| Brand | Lifestyle |
|---|---|
| Model | 60441U |
| Category | Outdoor Storage |
| Language | English |
Lists and identifies all plastic components required for assembly.
Identifies metal parts, hardware bags, and small kits for assembly.
Lists all required hardware, plastic and metal parts for door assembly.
Lists the tools necessary for performing the door assembly steps.
Details the process of assembling the left door, including attaching hardware and channels.
Details the process of assembling the right door, including attaching hardware and channels.
Lists all hardware components required for assembling the floor and wall panels.
Identifies the metal components for the floor and wall sections.
Identifies the plastic panels that form the floor and walls.
Lists the tools required for the floor and wall assembly process.
Assembling the floor panels and installing the rear wall panels.
Installing and securing the front corner wall panels to the structure.
Installing hinge tubes and caps for the wall structure.
Standing the structure up and securing wall panels and supports.
Lists all hardware components required for installing doors and roof.
Identifies the metal parts for door and roof installation.
Identifies the roof panel component.
Lists the tools necessary for installing doors and the roof.
Installing the roof beam and header onto the roof panel.
Installing hinge tubes and caps for both left and right doors.
Positioning the roof onto the walls and securing it with screws.
Lists all hardware components required for shelf installation.
Identifies the shelf support brackets (GNP).
Identifies the main shelf panel (GEL).
Securing the shelf brackets to the rear corner panels at the desired height.
Attaching triangular brackets to the wall support channels.
Installing the support tube, positioning the shelf, and fastening it to the brackets.
Inserting screws into unused shelf support channel locations.
Identifies the wall hooks (GKU) required for installation.
Lists tools needed for wall hook installation.
Inserting and locking the wall hooks into the wall panel notches.
Identifies shims (AIX) used for door alignment.
Lists tools needed for door alignment adjustments.
Steps to level the doors using shims if they are not properly aligned.
