Need help?Do you have a question about the Lifetime 60059 and is the answer not in the manual?
Follow all warnings carefully to avoid serious injury or property damage. Ensure proper assembly and use.
Position the floor panel flat on the ground as the initial step.
Align and insert the rear panel's tabs into the floor panel's notches.
Align and insert the front panel's tabs into the floor panel's notches.
Slide side panels into place between the front and rear panels.
Connect the gas spring to the hinge and ball studs for lid support.
Follow all warnings carefully to avoid serious injury or property damage. Ensure proper assembly and use.
Position the floor panel flat on the ground as the initial step.
Align and insert the rear panel's tabs into the floor panel's notches.
Align and insert the front panel's tabs into the floor panel's notches.
Slide side panels into place between the front and rear panels.
Connect the gas spring to the hinge and ball studs for lid support.
This document is an owner's manual for a Lifetime outdoor storage product, specifically Model N° 60059. It provides comprehensive instructions for assembly, usage, maintenance, and warranty information.
The primary function of this device is to provide outdoor storage. It is designed to be a durable and practical solution for keeping various items protected from the elements. The storage box is constructed with polyethylene panels, which are known for their stain and solvent resistance, contributing to the product's longevity and ease of care.
The assembly process is detailed, emphasizing that only adults should set up the product and children should be kept away from the setup area until assembly is complete. This highlights a safety-first approach to installation. The manual guides the user through the assembly of the box and the lid, including the installation of hinges and a gas spring mechanism. The gas spring is a key feature, designed to assist in opening and closing the lid smoothly, and it is specifically noted that the lid should not be pulled back more than 90 degrees to prevent damage to this component.
The storage box is designed for general outdoor storage purposes. It is not intended for institutional or commercial use, as such use would void the warranty. This suggests that the product is optimized for residential applications, such as storing garden tools, cushions, toys, or other outdoor essentials.
An optional security feature is also described: the ability to secure the deck box to a chain using a locking bracket. This indicates a consideration for theft prevention or securing the box in windy conditions, enhancing its versatility and peace of mind for the user.
The manual provides clear instructions for cleaning and care to ensure the product's longevity. The polyethylene panels are described as stain and solvent resistant, making them relatively easy to clean. For most stains, a mild soap and a soft-bristled brush are recommended. Abrasive cleaning materials are explicitly advised against, as they can scratch the plastic surfaces.
For any scratches or rust spots that may appear on metal components, the manual suggests a specific repair process: lightly sanding the affected area, applying a rust preventative spray primer, and then finishing with a high-gloss spray enamel paint. This proactive maintenance advice helps users keep the product in good condition and prevent further deterioration.
A crucial maintenance warning relates to the gas spring mechanism in the lid. Users are cautioned not to pull the lid back more than 90 degrees. Exceeding this angle can damage the gas spring and, consequently, void the product's warranty. This highlights the importance of understanding and adhering to the design limitations for proper function and warranty coverage.
The manual also emphasizes the importance of checking all nuts and screws for tightness before and during the usage season. This regular inspection helps ensure the structural integrity and safety of the storage box over time, preventing potential accidents or damage due to loose components.
Overall, the Lifetime outdoor storage box Model N° 60059 is presented as a user-friendly product with straightforward assembly, practical storage capabilities, and clear maintenance guidelines to ensure years of service and enjoyment for residential users. The emphasis on safety during assembly and proper care of specific components like the gas spring underscores the manufacturer's commitment to product durability and user satisfaction.
General| Material | High-Density Polyethylene (HDPE) |
|---|---|
| Color | Not available |
| Assembly Required | Yes |
| UV Protected | Yes |
| Weather Resistant | Yes |
| Capacity | 71 cubic feet |
To Next Page
