Lifetime 60059 - Install Lid Support Channel; Secure Lid Support Channel

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
14
SEC
BKWX
SEC
2.1
SEC
2.2
,AYTHELid (AND)UPSIDEDOWNONTHEGROUND)NSERTTHEENDOFTHELid Support Channel (BKV)INTOTHESLOTONTHE
UNDERSIDEOFTHE,IDASSHOWN4HENLAYTHE,ID3UPPORT#HANNELDOWNONTOTHEUNDERSIDEOFTHE,ID
Slot
Slot
#ENTERTHE,ID3UPPORT#HANNELONTHE,IDSOTHENOTCHINTHE,ID3UPPORT#HANNELlTSOVERTHENUBONTHE
UNDERSIDEOFTHE,IDASSHOWN&INALLYSECURETHE,ID3UPPORT#HANNELTOTHE,IDUSINGFOUR1/4” x 3/4” Hex-
Head Screws (BKW).
Center notch over nub
BKW
BKV
AND
BKW
Note: Ignore the hole at each end. These are for
manufacturing purposes only.
!
2
LID & HINGE ASSEMBLY