Lifetime 80193 - Page 12

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
12
SEC
SEC
1.6
Carefully turn the Frame upside down. Slide a Center Table Support (DAI) up into place as shown. Secure the Center
Table Support to the Frame using the required hardware. Do not completely tighten Nuts until instructed.
RearFront
1
DAI
DAAY
DAA
DAA
DAGY
DAGY
3/16”
Note: For 6’ round tables, attach the Center
Table Supports using these holes.
!
Note: For 5’ round tables, attach the Center
Table Supports using these holes.
!