TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
6.3
"%&/2%#/.4).5).'It is critical that the instructions in the following
steps are followed EXACTLY. Failure to properly orient and align the pole
sections will render the pole unusable. If the pole sections are assembled
incorrectly, you will have to purchase new pole sections from our
Customer Service Department. If you have questions regarding the pole
assembly, please call our Customer Service Department for assistance.
ALE
!,&
AT LEAST THREE ADULTS ARE REQUIRED. DO NOT!44%-04!33%-",97)4(&%7%2
THAN THREE ADULTS AND THREE LADDERS.
Playing
Surface
WARNING
5SEEXTREMECAUTIONWHENSTANDINGONLADDERSTO
perform assembly steps. Follow all warnings and
cautions on the ladder. Failure to follow all of these
instructions and warnings could lead to serious
PERSONALINJURYORPROPERTYDAMAGE
X
Align the hole in the -IDDLE0OLE!,& with the slot in
the Bottom Pole (ALE) and slide the Middle Pole over the
"OTTOM0OLE)NSERTAvXv3CREW!$3 through a
Domed Countersink Washer (CIH), into the small hole in
THE-IDDLE0OLEANDINTOTHESLOTINTHE"OTTOM0OLEAS
SHOWN4HE3CREWHEADSHOULDlTINTOTHE#OUNTERSINK
Washer.
!,&
ALE
ADS
CIH
ADSX
CIHX