Need help?Do you have a question about the LIFTINGITALIA InDomo HP and is the answer not in the manual?
Explains symbols used in the manual for clarity.
Highlights critical safety and operational notes.
Lists necessary personal protective equipment for safe operation.
Verifies the correct functionality of the control panel.
Details checks required for initial lift movements.
Confirms the proper operation of safety brakes.
Installer confirms the use of specified materials from the manufacturer.
Checks for permanent deformities after applying maximum static load.
Measures static pressure with maximum load against design specifications.
Evaluates gradual lowering performance with maximum load.
Tests the efficiency of the block valve with a fully loaded car.
Checks the overload manostat's response with a fully loaded car.
Measures and verifies car ascent and descent speeds.
Assesses the accuracy of lift stops at landings for loaded or empty cars.
Verifies safety space and mechanical resistance in the pit with a loaded car.
Tests the function of stop buttons and the alarm signal activation.
Checks the emergency power circuit for lighting and descent.
Ensures the lift shaft is completely closed.
Verifies the correct execution of all lift commands and stops.
Checks if the ceiling opening activates the safety chain.
Verifies if the COP opening activates the safety chain.
Tests the efficiency of overrun contacts and headroom clearance.
Checks the correct locking of all landing doors.
Measures distances between shaft and car entrances.
Ensures the car positions within the door unblocking area.
Verifies efficient car levelling with doors open.
Verifies the maximum pressure of the manual pump.
Checks the calibration and function of the overpressure valve.
Checks presence and correct assembly of pulley safety covers.
Verifies bracket distance against project drawing.
Checks electrical continuity and grounding.
Checks insulation resistance of electrical components.
Tests shaft lighting and socket functionality.
Tests photocells and light barriers for safety.
Tests the functionality of the optional button enabling key.
Checks conditions of the control cabinet, environment, and access.
Verifies correct application of safety plates and signs.
Measures sound pressure levels in different areas.
General| Brand | LIFTINGITALIA |
|---|---|
| Model | InDomo HP |
| Category | Lifting Systems |
| Language | English |
To Next Page
