Note: If you experience any issues with the lights not working
and“ suspect an issue with a component, please try a
different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with
expansion board ports, please view the section addressing
expansion board issues on our online troubleshooting guide.
Power Bank Note – If your are using the Light My Bricks USB Power Bank, it is
normal for the strip light to turn off automatically after a few minutes. This is
due to very low power being consumed from the power bank. You won’t have
this issue later on when you connect up more lights.
7.)
To Next Page
Loading...
