INSTRUCTIONS 4
DIRECTIONAL
CONNECT
DISCONNECT
TURN / FLIP NOTE ICON
POWER ON TEST
TWIST / BRAIDBEND / PIVOT
LEGO
®
EIFFEL TOWER 10307 LIGHT KIT INSTALL GUIDE
1
NOTE
This is Part 2 of the Eiel
Tower Light Kit Instructions
If you have not completed
Part 1 first, click the box.
Part 1
Links to instructions portal page
Click me!
NOTE
Connect the 15cm Connecting
Cable into the “+5V” port on the
RGB IR Control Board.
NOTE
Ensure the 2nd level of the
Eiel Tower lines up with the
first. The correct side has the
flat plates and studs in the
following locations.