LIGHT MY BRICKS Palace Cinema - User Manual

lightmybricks
User Guides for Light My Bricks LED Lighting Kits for LEGO®
May 23, 2016 · 23 min read
Light My Bricks : Palace Cinema LED
Lighting Kit
Here is the instruction document for the Lego Palace Cinema LED lighting
kit. Please read and follow the steps carefully to ensure this lighting kit is
installed properly.
. . .
Package contents:
• 5x LED Strip Lights
• 15x Standard Bit Lights (warm white)
• 12x Flashing Bit Lights (white)
• 3x 12-Port Expansion boards
• Lamp Post with LED and cable attached
• 1x Battery Pack (3x AA batteries not included)
• 8x Adhesive squares
Connecting Cables
• 2x 5cm cables
• 3x 15cm cables
• 2x 30cm cables
. . .

Summary

Essential LED Kit Installation Guidelines

Safe Cable Routing Techniques

Learn how to lay cables between LEGO studs to prevent damage and ensure a clean installation.

Proper Connector Attachment

Detailed instructions for safely connecting LED components and expansion boards without causing damage.

Optimal Bit Light Placement

Guidance on positioning bit lights correctly for the best lighting effect and easy installation.

Palace Cinema Lighting Kit Assembly

Initial Building and Lamp Post Setup

Start installation by setting up the lamp post light and initial cable runs.

Installing Ticket Window and Spot Lights

Integrate lights for ticket windows and building spotlights, connecting to expansion boards.

Assembling the Marquee Lighting System

Detailed steps to install flashing LEDs within the Palace Cinema's marquee structure.

Connecting Upper Floor and Roof Lights

Install lights for arch windows, roof sections, and connect the battery pack for final testing.

LIGHT MY BRICKS Palace Cinema Specifications