LIGHT MY BRICKS R2-D2 LED Lighting Kit User Manual

WARNING: Incorrectly inserting the connector can result in bent pins inside the port or
possible overheating of the expansion board when connected.
Installing Bit Lights under LEGO® bricks and plates.
When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way
up (Yellow LED component exposed). You can either place them directly on top of
LEGO® studs or in between.

LIGHT MY BRICKS R2-D2 LED Lighting Kit Specifications

General

Brand	LIGHT MY BRICKS
Model	R2-D2 LED Lighting Kit
Category	Toy
Language	English