■ The light beam dark,not inhomogeneou.
◎ when the light suore is to the usage life,the light suore is not enough,please change a new one for
the same description.
◎ Please check the reflector parts is dirty.Keep them clear.
◎ Please measure if the power supply is enough.
◎ Enter the menu“service options”to choose “calibration”to enter the “Color” and“Gobo”
adjustment,the center can be modulated.
■ The fixture shadow is fogging。
◎ Please check the data on the DMX 512 controller is suitable for the electric focus.
◎ Please check the machenical parts is jamging.After cleaning,please add some
temperature -durable juice.
■ Part of the fixture couldn’t responsled to the controlling order:
◎Please check the order is correct to the moving .
◎Please check the mechanicalpart is deformation or loose.
◎Please check the function to the motor soshet is loose or drive chip is burn down;
◎Please check the wire of the motor is cut at zig piont;
◎Please check these function to the motor is damaged.
■ On working,the pan & tilt couldn’t work normally:
◎Please check according to the above step by step;
◎Please check the belt of the pan & tilt is broken;
◎Please check the pan & tilt direction data to the receiver is damage;
◎Restart the fixture and reset
27
To Next Page
Loading...
