Light LIGHT-CONTROL 512

To Next Page

Quick Start Guide

SAFETY INSTRUCTIONS

Before using these devices, please read carefully all the warnings and instrucons contained in the user manual.

The complete USER MANUAL for LIGHT-CONTROL 512 and LIGHT-CONTROL EXTENSION is included in the USB

memory key supplied with the LIGHT-CONTROL 512 controller.

POWERING UP

The LIGHT-CONTROL 512 controller should only be connected to power source type specied on the AC/DC adapter.

If the supplied AC power plug is dierent from the wall socket, please contact an electrician to change the AC power

socket or contact LIGHT INC to change the AC/DC adapter. The adapters that can be supplied by LIGHT INC are the

following:

• VDE PLUG for all UE countries except UK

• BS PLUG for UK country

• UL PLUG for US country

If the devices are not used for a long period of me, please unplug the power adapter from AC power outlet.

OPERATING INSTRUCTIONS

For a quick setup see the pictures in the next page.

For detailed instrucon see the USER MANUAL: LIGHT-CONTROL 512 is a powerful and easy to use DMX controller, but

to get the best results it’s essenal to read thoroughly the manual.

The User Manual contained in the memory key is in PDF le format, so to read it and print it you must download the

ACROBAT READER soware freely available from the web site www.adobe.com.

WHAT’S IN THE BOX

If Purchased LIGHT-CONTROL 512

N. 1 LIGHT-CONTROL 512

N. 1 Mains Adapter 12V - 2A

N. 1 USB Lamp

N. 1 USB memory key with the following les: user manual, xture editor program for Windows PC, xture les

If Purchased LIGHT-CONTROL EXTENSION – Sold separately

N. 1 LIGHT-CONTROL EXTENSION

N. 1 CAT5 UTP cable (1mtr)

N. 1 LIGHT-CONTROL 512-LIGHT-CONTROL EXTENSION link plate

N. 4 MA 3x 12mm screws

Light LIGHT-CONTROL 512 - User Manual