Light4Me COB PIXEL BAR 10 RGB User Manual

LIGHT4ME COB PIXEL BAR 10 RGB
User Manual
This pixel COB Par can make very nice and bright effect as an architectural wall wash or for performance stages
where traditional stage lighting emit a lot of heat onto performers. Please read the manual before operation.
A. SPECIFICATION
1. Voltage: AC 100V-240V, 50Hz/60Hz
2. Power consumption: 105W
3. LED: COB 10*Tri-9W RGB
4. Beam angle: 55 degree
5. DMX channels: 3, 5, 30 CH
6. Operation mode: LCD display
7. Working temperature: -10~40℃
8. Dimension: 900*182.5*111mm
9. Net weight: 7kgs
10. Power linking: 4pcs@110V, 8pcs@240V
11. Lumen:
R
227lux@2m
G
303lux@2m
B
296lux@2m
Full on
767lux@2m
B. OPERATION
This fixture has six working modes; press the “MODE” button can switch the modes.
 Built-in programs
 Auto running
 DMX mode
 Master/slave
 Sound-active
 Static color

Light4Me COB PIXEL BAR 10 RGB Specifications

General

Brand	Light4Me
Model	COB PIXEL BAR 10 RGB
Category	DJ Equipment
Language	English

Summary

Product Specifications

Product Operation Modes

Built-in Programs Mode

Controls product's pre-programmed lighting sequences with adjustable color and strobe effects.

Auto Running Mode

Enables automatic operation with adjustable time, speed, and strobe effects.

DMX Mode

Allows control via DMX protocol with selectable channel configurations (3, 5, 30 CH).

Master/slave Mode

Enables synchronization of multiple fixtures controlled by one master fixture via DMX cables.

Sound-active Mode

Activates lighting effects synchronized to ambient sound with adjustable sensitivity.

Static Color Mode

Sets a single, constant color with adjustable brightness for RGB channels.

Restore Factory Settings