Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 5
Hot swapping the batteries
ApexZ will allow the user to remove one battery while the instrument is powered on and sampling. This allows
the user to continue to sample with one battery while recharging the second battery. A charged second battery
may then be reinstalled into the instrument while ApexZ is still sampling.
Hot swapping allows the user to install a newly charged battery and
then remove a low charged battery while the instrument is sampling
under battery power.
Use the optional battery charger (part #: 017789752 single battery
charger, or part #: 017789753 dual battery charger) to charge batteries
outside of the ApexZ instrument.
Batteries inserted into ApexZ will always charge while ApexZ is plugged
into the AC power with the AC power adapter and power cord.
Charging the batteries outside of ApexZ
Optional Dual Bay Desktop Charger for charging up to 2 ApexZ batteries at the
same time. Batteries not included.
WARNING: Only use batteries provided with the ApexZ
by Lighthouse Worldwide Solutions. Use of unauthorized
batteries may cause damage to equipment, void
warranty, and pose a threat to safety.
To Next Page
Loading...