Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 83
Wi-Fi
Press the Wi-Fi Enable button to enable Wi-Fi.
Press the + button to Configure one to five Wi-Fi
connections.
Press the Scan button to search for available
Wi-Fi networks or routers in the area.
Press and select a Wi-Fi network
for your ApexZ communication.
After a Wi-Fi has been selected ApexZ will mark
with a red dot the remaining required tabs to
complete the configuration.
Connectivity: Wi-Fi Screen
Open Wi-Fi configurations:
Security will be preset to “None”.
Enterprise Wi-Fi configurations:
Security will be preset to WPA-EAP.
Server Certificates are accepted but not required.
Username input is required.
Password input is required.
Local Network Wi-Fi:
Security will be preset to WPA-PSK.
Password input is required.
To Next Page
Loading...