Lighthouse Worldwide Solutions ApexZ Operators Manual
248083466-1 R6 126
If no Group Name is selected the all locations will be
available to be assigned to the new certification.
Select one or more location names and each will
highlight blue indicating it has been selected. Each
location selected will be displayed under the Assigned
Locations column.
To undo a selected location from the assigned list
simply press the location name to de-select and it will
highlight grey and that location will be removed from
the assigned locations list.
Press the Name button to display the Enter Certification Name screen next.
Enter the New Certification name using the keypad.
Press the green Apply button to apply the new
certification name.
Certification Name - Apply
To Next Page
Loading...