Lighthouse Remote Series - Page 56

Lighthouse REMOTE 2014P, 3014P, 5014P Operating Manual
A-4 248083408-1 Rev 1
40034 unsigned integer Sample Time [low]
40035 unsigned integer Data Set [high]. Works in conjunction with 40036. Data entered
here is applied to the device through the command register.
40036 unsigned integer Data Set [low]
40037 unsigned integer Alarm Mode. Type of alarming performed
40038 unsigned integer Alarm Parameter. Control parameter for given alarm mode.
40039 unsigned integer Laser Reference Voltage (millivolts)
40040 unsigned integer View Volume. Divide by 100 to get percentage.
For example: 6550d = 65.50%
40041 ASCII string Flow Unit. Defines unit as cfm, lpm, mlpm.
40042 ASCII string Flow Unit. char[2], char[3]
40043 unsigned integer Calibration Reference Voltage (millivolts)
40047 signed integer Calibration Due Date [high]. Indicates when instrument is due
for calibration. this number can be generated by the ANSI C/
C++ time() function.
40048 signed integer Calibration Due Date [low].
40049 signed integer Printer Options
40050 unsigned integer Device Options
40051 signed integer Current record. Displays last record number recorded by
instrument.
40052 signed integer Record number. Set this value to desired record number to
display data in 3xxxx registers. Value corresponds to record
number in instrument data buffer. Set to -1 to retrieve the last
record stored by the counter.
...
40199 unsigned integer Number of available location names (0=not supported).
200 Locations Available (Register 40050 Bit 3 = 0)
40200 ASCII string Location_1_char[0], char[1] (NULL terminated string)
40201 ASCII string Location_1_char[2], char[3]
40202 ASCII string Location_1_char[4], char[5]
Table A-3 Sensor Settings Registers
Register Data Type Description