Lighthouse Remote Series - Page 75

00
248083408-1 Rev 1 I-1
Index
Numerics
2014P instrument 2-1
3014P instrument 2-1
4-20mA Analog Inputs 3-6
5014P instrument 2-1
5-port hub 3-12
A
Accessories 2-2
Additional help 1-i
Addressing 4-3
Administrator rights 3-12
Alarm Enable Registers A-8
Alarm Registers
Enable Alarming A-10
Analog Input Ports 3-5
Analog Sensors 3-6
4-20mA Analog Inputs 3-6
Connector Pinout 3-6
Ports 3-7
ARP 3-11
ARP Cache 3-11
ARP Command to Add New IP 3-15
arp -d * 3-15
arp –d * 3-19
arp –s 3-15
Assigning Gateway IP Address 3-17
Assigning Netmask 3-17
AUTOMATIC Counting Mode 4-10
Automatic Mode 4-9
B
Big-endian data A-12
C
Clear LAT 3-19
Clear the Data Buffer 4-9
Clearing the Address Table 3-15
Clearing the ARP Cache 3-19
CMD 3-14
Command Console 3-14
Command Register A-7
Communicating with the Instrument 4-4
Communication Mode 4-2
Communication Ports 3-5
Communication ports 3-5
Communications Settings A-1
Configuring with REMOTE Display 4-6
Configuring with the MODBUS Protocol 4-6
Connection to host lost 3-18
Connections 3-4
Analog Input Ports 3-5
Communication ports 3-5
Power 3-5
REMOTE Display Connector 3-5
Cross-over Cat5 3-12
Cross-over Cat5 Setup 3-13
D
Data 3-19
Data Registers A-12, A-15
Device Status Word A-14
Data Type Registers A-16
Data Units Registers A-17
Default Instrument Parameters
Changing 4-7
Definitions 3-11
Device Status A-7
Device Status Word A-14
DHCP 3-11
DIP Switches 3-7, 4-1