Lighthouse Remote Series - Page 78

Lighthouse REMOTE 2014P, 3014P, 5014P Operating Manual
I-4 248083408-1 Rev 1
Laser safety information 1-1
Save 4-9
Saving the Settings 3-18
Sensor Settings Registers A-2
Set adapter’s IP address 3-16
Setting DIP Switches 4-2
Setting the Alarm Threshold Value A-12
Setting the Real Time Clock 4-7
Shipping instructions 3-2
Straight-through Cat5 3-12
Straight-through Cat5 Setup 3-13
Subnet 3-12
Supported MODBUS Commands A-1
Supporting Software 2-3
T
TCP/IP 3-12
Telnet 3-12
Telnet 1 3-15
Telnet 9999 3-16
Telnet Config Password Screen 3-18
Telnet Programming 3-14
Text conventions 1-i
Threshold Setup Registers A-11
Setting the Alarm Threshold Value A-12
U
Understanding LEDs 3-3
USB / RS232 Communications 3-8
USB A to B cable 3-9
USB cable 3-9
USB Connector 3-5
USB driver install 3-8
USB driver installation notes 3-8
USB port assignment 3-10
V
Valid Data in Channels (30073-30076) A-15
W
Warning
Infrared Radiation 1-1
Warranty C-1
Warranty Of Repairs After Initial Two (2) Year
Warranty C-1
Z
Zero Count Check B-1
Zero Count Level 2-5
Zero Count Test B-1