Lightmaxx Vector Low Fog User Manual

ENGLISH
Timer Mode
In the timer mode, the fog machine will automatically emit fog. The time intervals, duration and
fog volume depend on the corresponding menu settings. Press the TIMER button, to activate the
timer mode. The display indicates the set time interval:
Interval xxx s
The unit counts down to 0 seconds and emits fog. To deactivate the timer mode, press the Stop
button.
Volume (Continuous Mode)
Press the VOLUME button, to activate continuous fog output. The display indicates Volume
followed by the value that was set in menu item “Volume Out”:
Duration xxx s
To stop the fog output, press the Stop button.
Remote control mode:
The device can be managed remotely using the remote control included in the scope of delivery.
To do this, plug the wireless receiver into the connection on the rear of the unit. Please note that
the device cannot be controlled by remote control if it is connected to DMX.
The remote control has 2 buttons: Press the "A" button to trigger a permanent fog emission. To
stop the fog output, press button "B".

Lightmaxx Vector Low Fog Specifications

General

Brand	Lightmaxx
Model	Vector Low Fog
Category	Fog Machine
Language	English