Lightolier FBP100FE User Manual

FBP100FE
450 LUMEN LINEAR FLUORESCENT EM. BALLAST
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
Features
Illumination: The FBP100FE
provides 90 minutes of
emergency illumination by
utilizing existing fluorescent
lighting, and produces 350-450
lumens initial emergency light
output. The FBP100FE can be
used with most 17 to 40 W
(2’-4’) T8, T10, or T12
fluorescent lamps without
integral starters, including
U-shaped, HO, VHO, circline,
energy saving, and 4-pin
compacts. It is also compatible
with most 1-, 2-, 3-, and 4-lamp
electronic, standard, energy
saving and dimming AC ballasts.
See lamp operation for specific
lamp types.
Housing: Housing is
constructed of 20 gauge steel
with a high temperature
powder coat paint finish. Slim
housing allows for wireway
channel mounting on most
lighting fixtures.
Operating Temperature
Range:
32°F (0°C) to 131°F (55°C)
Electronics: 120/277 VAC
dual voltage input with surge
protected, solid-state charging
circuitry provides for a reliable
charging system. Charging
system is complete with AC
indicator lamp and test switch.
Electrical Specifications:
I
nput Power
3.5 W max.
Battery
Maintenance free, sealed nickel
cadmium battery. Supplies 90
minutes of emergency power.
Estimated service life of 10
years.
Lamp Operation
1
: Operates
the following lamp types
2
:
T8 linear fluorescent
T12 linear fluorescent
T9 circline
T12 U-bent
T5 long compact fluorescent
Notes:
1) Consult factory for compatibility
and performance of product with lamp
types not listed.
2) See Table 1 for specific lamp
performance and operation.
Code Compliance
UL 924 listed. NFPA 70, NFPA
101, NEC, BOCA, OSHA and
IBC illumination standards.
Suitable for use in sealed and
gasketed luminaires.
Warranty
One year full electronics
w
arranty. One year full battery
warranty.
FBP100FE
9.4"
(23.9 cm)
1.5"
(3.8 cm)
2.4"
(6.1 cm)

Lightolier FBP100FE Specifications

General

Brand	Lightolier
Model	FBP100FE
Category	Accessories
Language	English

Summary

Product Features

Illumination

Provides 90 minutes of emergency illumination, producing 350-450 lumens for various fluorescent lamps.

Housing

Constructed of 20 gauge steel with powder coat finish, suitable for wireway channel mounting.

Operating Temperature Range

Specifies the operational temperature range from 32°F (0°C) to 131°F (55°C).

Technical Specifications

Electronics

Features 120/277 VAC dual voltage input with surge protected, solid-state charging.

Electrical Specifications

Input power is rated at 3.5 W maximum.

Battery

Maintenance-free, sealed nickel-cadmium battery supplying 90 minutes of emergency power.

Lamp Operation

Supports various linear and compact fluorescent lamp types including T8, T12, and T5.

Compliance and Warranty

Code Compliance

UL 924 listed and meets NEC, NFPA, OSHA, and IBC illumination standards.

Warranty

Includes a one-year full warranty for both electronics and battery.

Ordering Information

Series and Options

Details the FBP100FE series designation and optional EX special input transformer.

Accessories

Lists available accessories such as wire cover kits and remote test plates.

Lamp Operation and Performance

Table 1: Lamp Performance

Provides a table detailing lamp types, wattage, base, non-emergency, and emergency lumen output.