DAILY OPERATION INSTRUCTIONS
2. Remove the microphone from the charger and put on.
• The microphone will default to the Mute position, the
teacher status will turn to red.
• Place the microphone around your neck and insert the
earbud.
• Press the power/mute button, the teacher status will
turn blue, indicating the microphone is active.
1. Remove the pods from the charger and place them on the group tables.
• The speakers will stay powered on while charging when the switch is left in the on position.
• Note the location of the pod numbers.
Vol
Vol
Mute
6
5
1
3
2
4
UP DN
Power /
Mute
3. Remove the remote and begin instruction. Use the
remote to:
• Address the whole class
• Instruct small groups
• Redirect small groups
• Monitor (listen only) small groups
• Activate student group sharing
• Adjust earbud volume
To Next Page
