Lightwave Link Plus - Preparation; What do I need?; Range & Positioning; Voice Control

Range & Posioning
The wireless range of a single Link Plus should cover a
typical large house. To ensure the best performance, try
not to posion the Link next to radiators, water tanks
or very thick walls. Sing the Link as high up as possible
within your home (e.g. on the rst oor) will always
provide the best coverage.
Help video & further guidance
For addional guidance, and to watch a video that will
help guide you through the installaon process, please
visit the support secon on www.lightwaverf.com
Voice Control
You can use your voice with Siri on compable Apple
devices, with Google Assistant, and with Amazon Alexa
to issue commands to Lightwave, to control devices e.g.
“Turn the living room lights on”. See www.lightwaverf.
com for more informaon.
Control from anywhere
You can control Lightwave devices whilst away from
home using your app. You can also use automaons to
schedule devices to work automacally at mes that
you set in the App.
Expand your system
Lightwave is very exible, and you can add new Light-
wave devices to your system at any me. Other family
members can also download the App and use it to con-
trol devices on their own smartphone or tablet.
What do I need?
The Lightwave Link Plus requires mains power and a
standard wireless router with a permanent internet con-
necon in order to operate. You will also require a WiFi
enabled smartphone, tablet or PC.
Preparaon
Main buon
Ethernet Port
Indicator LED
Power (Micro USB)
EU Declaraon of Conformity
Product: Link Plus Wireless RF Controller
Model/Type: LP2
Manufacturer: LightwaveRF
Address: The Assay Oce, 1 Moreton Street,
Birmingham, B1 3AX
This declaraon is issued under the sole responsibility
of the LightwaveRF. The object of the declaraon
described above is in conformity with the relevant union
harmonisaon legislaon.
Direcve 2011/65/EU ROHS,
Direcve 2014/53/EU: (The Radio Equipment Direcve)
Conformity is shown by compliance with the applicable
requirements of the following documents:
Reference and date:
EN301489-3 V1.6.1: (EMC), EN300220-2 V3.1.1
(RF), EN62479:2010 (RF Exposure), EN60950-
1:2006+A2:2013 (Safety)
Signed for and on behalf of:
Place of Issue: Birmingham
Date of Issue: August 2021
Name: John Shermer
Posion: CTO
Environmentally friendly disposal
Old electrical appliances must not be disposed of
together with residual waste, but have to be disposed
of separately. The disposal at the communal collecng
point via private persons is for free. The owner of old
appliances is responsible to bring the appliances to these
collecng points or to similar collecon points. With this
lile personal eort, you contribute to recycle valuable
raw materials and the treatment of toxic substances.
UK
1
Specicaon
RF Frequency: 868MHz
Output Rang: 3W Approx.
Input Rang: 5V
Warranty: 2 year standar
Please Note:
The LP2 variant of the Link Plus is not backward com-
pable with Connect Series devices. If you are a Con-
nect Series user, you will require the L2 model which is
backward compable.